# Panduit: Turn-Tell label drawing C11067

> Customer drawing C11067, revision 0 released August 20, 2013, for part R050X075X1J, titled a laser/inkjet Turn-Tell rotatable self-laminating label. Establishes the label’s geometry on its 8.5 by 11 inch sheet: 0.50 inch wide and 0.75 inch long, with a 0.25 inch print-on area marked as the imprint area on the length and the remainder marked as clear area, listed for 18 to 14 AWG wire and cable. Cited with the installation instruction to fix which dimension of a wrap runs along the cable and which around it. Dimensions only; nothing from the drawing is reproduced and no performance is asserted. Checked September 16, 2026.

Canonical page: https://datacenterlabeling.com/references/s78

Original source: [Panduit: Turn-Tell label drawing C11067](https://www.panduit.com/content/dam/panduit/en/products/media/3/23/723/8723/111108723.pdf)

## Scope of this source

Customer drawing C11067, revision 0 released August 20, 2013, for part R050X075X1J, titled a laser/inkjet Turn-Tell rotatable self-laminating label. Establishes the label’s geometry on its 8.5 by 11 inch sheet: 0.50 inch wide and 0.75 inch long, with a 0.25 inch print-on area marked as the imprint area on the length and the remainder marked as clear area, listed for 18 to 14 AWG wire and cable. Cited with the installation instruction to fix which dimension of a wrap runs along the cable and which around it. Dimensions only; nothing from the drawing is reproduced and no performance is asserted. Checked September 16, 2026.

Cited for the dimensions of one rotating wrap label and where its print-on area lies. Dimensions only; no performance claim.

Source review: 2026-09-16.

Rackstamp provides editorial field guidance. IDs, cases, and worksheet entries are fictional examples unless identified otherwise. Distinguish local conventions from adopted standards. Source notes describe the evidence scope; a linked overview is not the full standard or a project approval.

## Related guidance

- [I cannot identify the other cable end](https://datacenterlabeling.com/problems/cable-endpoint-identification)