Marker capabilities are product-specific; proposed sample review makes no universal fit claim. Re-read in full on September 16, 2026. The Turn-Tell table lists, for each part, a width, a length, a print-on area height and a minimum and maximum cable outside diameter, together with the wire and cable size range it is listed for, and lists several widths for each diameter range, from 0.50 to 2.00 inches. The self-laminating polyester table is built the same way and is listed from a 2.0 mm cable. Also establishes that Turn-Tell labels rotate and slide along cables after installation and are described as ideal for high-density or space-constrained applications, that both wrap materials are for wrap format and are not recommended for flag format, and that the LabelCore fiber system is a 1 inch flexible PVC sleeve for 2 mm and 3 mm simplex cable, used with a 1.00 inch wide label and located on a straight section at least 2 inches from the fiber boot. Character counts derived from these dimensions are this library’s arithmetic at a stated reading distance, with the legend read along the cable as the manufacturer’s installation instruction shows, not a manufacturer claim, and no product performance is asserted. Checked September 16, 2026.
Marker capabilities are product-specific; proposed sample review makes no universal fit claim. Re-read in full on September 16, 2026. The Turn-Tell table lists, for each part, a width, a length, a print-on area height and a minimum and maximum cable outside diameter, together with the wire and cable size range it is listed for, and lists several widths for each diameter range, from 0.50 to 2.00 inches. The self-laminating polyester table is built the same way and is listed from a 2.0 mm cable. Also establishes that Turn-Tell labels rotate and slide along cables after installation and are described as ideal for high-density or space-constrained applications, that both wrap materials are for wrap format and are not recommended for flag format, and that the LabelCore fiber system is a 1 inch flexible PVC sleeve for 2 mm and 3 mm simplex cable, used with a 1.00 inch wide label and located on a straight section at least 2 inches from the fiber boot. Character counts derived from these dimensions are this library’s arithmetic at a stated reading distance, with the legend read along the cable as the manufacturer’s installation instruction shows, not a manufacturer claim, and no product performance is asserted. Checked September 16, 2026.
The linked guide explains how this source informs its topic. Check the document’s scope and the edition adopted by your project before applying it. A publisher overview or product guide does not reproduce the full requirements of a standard.
