Read it in context.
Customer drawing C11067, revision 0 released August 20, 2013, for part R050X075X1J, titled a laser/inkjet Turn-Tell rotatable self-laminating label. Establishes the label’s geometry on its 8.5 by 11 inch sheet: 0.50 inch wide and 0.75 inch long, with a 0.25 inch print-on area marked as the imprint area on the length and the remainder marked as clear area, listed for 18 to 14 AWG wire and cable. Cited with the installation instruction to fix which dimension of a wrap runs along the cable and which around it. Dimensions only; nothing from the drawing is reproduced and no performance is asserted. Checked September 16, 2026.
The linked guide explains how this source informs its topic. Check the document’s scope and the edition adopted by your project before applying it. A publisher overview or product guide does not reproduce the full requirements of a standard.
Read the library’s edition and applicability notes.
What this source establishes
Cited for the dimensions of one rotating wrap label and where its print-on area lies. Dimensions only; no performance claim.
Review date: 2026-09-16. This note describes the source scope; it is not a project approval.